0.2 (5 Apr 2006)
- kernel-image-2.6.15-486-voyage_2.0-10
	- Debian linux source 2.6.15-8
	- enable syn cookies
	- add hostap-EAPOL-fix.patch
- updated hostapd and wpasupplicant to 0.5.2
- madwifi-ng modules (r1491)
- add parprouted and bzip2
- voyage-util to sync /var/run in shutdown
- add voyage-configure.sh, format-cf.sh to /usr/local/sbin
- add voyage.conf to /etc
- add voyage login banner
- increase /rw tmpfs to 8M

0.2pre4 (26 Feb 2006)
- kernel-image-2.6.15-486-voyage_2.0-9
	- Debian linux source 2.6.15-7
	- PXE booting with CRAMFS (CONFIG_BLK_DEV_RAM, CONFIG_BLK_DEV_INITRD and CONFIG_CRAMFS)
	- i2c-nscacb support for Routerboard 
	- prism54 WDS support 
- add more samples in /etc/network/interfaces
- add bcm43xx firmware in /usr/lib/hotplug/firmware
- add new util, mount-proc.sh in /usr/local/sbin
- improved remove.docs
- add "options ath_pci autocreate=none" in /etc/modprobe.d/madwifi
- remove SystemV timezones
- madwifi-ng modules (r1453)
- add traceroute

0.2pre3 (05 Feb 2006)
- kernel-image-2.6.15-486-voyage_2.0-8
	- usbserial_maxsize.patch (usb high speed serial patch)
	- cdc-acm_2.6.14.c.patch (cdc_acm high speed patch)
	- NFS v3 client, rootfs & IP PNP (to support pxeboot in future)
	- remove madwifi driver in kernel source (now madwifi available in separate modules)
	- DOS/FAT/NT file systems 
	- SCSI disk storage (sd) and generic storage (sg) support 
	- NLS support for code page 437 and ISO-8859-1
	- loop and cloop 
- madwifi-ng modules (r1408) as default.
- root password now defaults to "voyage"
- DHCP enabled for dnsmasq 
- add less package
- wireless-tools 27+28pre13 
- customization scripts (in /usr/share/voyage-custom)

0.2pre2 (06 Jan 2006)
- kernel-image-2.6.15-486-voyage_2.0-7 
    - ipv6 basic support
	- video for linux
	- usb serial
	- lm77 fix for negative temperature (by Michael Renzmann)
	- scx200_acb probe delay fix (only 2.6.12, 2.6.14 and 2.6.15, by Ben Gardner)
	- madwifi-old CVS 20051224 
- add scx200_acb and lm77 to /etc/modules if for WRAP option in voyage.update
- regenerate ssh host keys for first time installation

0.2pre1 (21 July 2005)
- New 0.2 development
- kernel-image-2.6.8-486-voyage_2.0-2
    - Support module unload ( requested by Matthias Lemke )
    - sc520_wdt ported from 2.6.12 ( suggested by Pablo Osuna )
    - madwifi_20050712 MAIN branch (merged from BSD branch supported for 
adhoc mode)
    - hostap 0.3.9 driver
    - USB support
    - Bluetooth support
    - Remove ipw2100 module, which is available in separate kernel 
module package
- change apt repository to http://www.voyage.hk/dists/0.2
- use madwifi-tools instead of madwifi
- remove posix and right in /usr/share/zoneinfo (less 2MB in distro)
- change fstab to mount / as read-write 
- use /etc/init.d/voyage-util script (by Yiorgos Adamopoulos)
	- set root password in first run 
	- call /etc/init.d/rmnologin 
	- remount / read-only
- voyage.update
	- new WRAP option (detach from 4501/4801 option)
	- remove setting passwd
	- use reboot=bios (in lilo.conf) for WRAP

===========================================================================
0.1sarge (7 July 2005)
- special release for based on Debian Sarge (r3.1)

0.1 (14 Feb 2005)
- add ebtables and ifenslave
- update kernel image revision to 1.4 : kernel-image-2.6.8-486-voyage_1.4_i386.deb
	- enables i2c, lm77 sensors and other hardware sensors.
	
0.1pre5 (1 Feb 2005)
- fix high cpu consumption in nocatsplash 
- new Debian kernel source 2.6.8-13
	- update kernel image revision to 1.3 : kernel-image-2.6.8-486-voyage_1.3_i386.deb
	- add bonding, dm-mod and dm-crypt modules
	- add necessary modules required by OpenSWAN/FreeSWAN
	- fix kernel reboot for WRAP board

0.1pre4 (17 Jan 2005)
- nocatsplash 0.92
- fixed syslogd not logging 
- nat.sh: integrate with nocat

0.1pre3 (13 Jan 2005)
- new upstream Debian kernel source 2.6.8-12, with new driver patches
	- update kernel image revision to 1.2 : kernel-image-2.6.8-486-voyage_1.2_i386.deb 
	- hostap-driver 0.2.6 (update)
	- madwifi-cvs 20050109 (update)
	- rt2400 driver 1.2.1 (new)
	- ipw2100 driver 1.0.2 (new)
	- wd1100 driver (new, ported to 2.6 kernel) 
- change sarge.install to voyage.dpkg-l
- change sarge.dpkg.list to voyage.dpkg.list
- change sarge.depend.list to voyage.depend.list
- add watchdog package

0.1pre2 (6 Jan 2005)
- fix madwifi driver not loading 
- support for various config from installation script
- add lilo.conf to /etc/

0.1pre1 (2 Jan 2005)
- first preview release
- based on Debian Sarge r3.1
- 2.6.8.1 kernel
- prism54, hostap and madwifi drivers
- hostapd, wpa_supplicant from sarge
